mirror of
https://github.com/Grasscutters/mitmproxy.git
synced 2024-11-27 10:26:23 +00:00
48 lines
1.9 KiB
ReStructuredText
48 lines
1.9 KiB
ReStructuredText
.. _linux:
|
||
|
||
Linux
|
||
=====
|
||
|
||
On Linux, mitmproxy integrates with the iptables redirection mechanism to
|
||
achieve transparent mode.
|
||
|
||
1. :ref:`Install the mitmproxy certificate on the test device <certinstall>`
|
||
|
||
2. Enable IP forwarding:
|
||
|
||
>>> sysctl -w net.ipv4.ip_forward=1
|
||
|
||
You may also want to consider enabling this permanently in ``/etc/sysctl.conf`` or newly created ``/etc/sysctl.d/mitmproxy.conf``, see `here <https://superuser.com/a/625852>`__.
|
||
|
||
3. If your target machine is on the same physical network and you configured it to use a custom
|
||
gateway, disable ICMP redirects:
|
||
|
||
>>> sysctl -w net.ipv4.conf.all.accept_redirects=0
|
||
>>> sysctl -w net.ipv4.conf.all.send_redirects=0
|
||
|
||
You may also want to consider enabling this permanently in ``/etc/sysctl.conf`` or a newly created ``/etc/sysctl.d/mitmproxy.conf``, see `here <https://superuser.com/a/625852>`__.
|
||
|
||
4. Create an iptables ruleset that redirects the desired traffic to the
|
||
mitmproxy port. Details will differ according to your setup, but the
|
||
ruleset should look something like this:
|
||
|
||
.. code-block:: none
|
||
|
||
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 8080
|
||
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 443 -j REDIRECT --to-port 8080
|
||
|
||
You may also want to consider enabling this permanently with the ``iptables-persistent`` package, see `here <http://www.microhowto.info/howto/make_the_configuration_of_iptables_persistent_on_debian.html>`__.
|
||
|
||
5. Fire up mitmproxy. You probably want a command like this:
|
||
|
||
>>> mitmproxy -T --host
|
||
|
||
The ``-T`` flag turns on transparent mode, and the ``--host``
|
||
argument tells mitmproxy to use the value of the Host header for URL display.
|
||
|
||
6. Finally, configure your test device to use the host on which mitmproxy is
|
||
running as the default gateway.
|
||
|
||
|
||
For a detailed walkthrough, have a look at the :ref:`transparent-dhcp` tutorial.
|