#!/usr/bin/env perl # Copyright (c) 2019, Google Inc. # # Permission to use, copy, modify, and/or distribute this software for any # purpose with or without fee is hereby granted, provided that the above # copyright notice and this permission notice appear in all copies. # # THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES # WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY # SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES # WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION # OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN # CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. # ghash-ssse3-x86.pl is a constant-time variant of the traditional 4-bit # table-based GHASH implementation. It requires SSSE3 instructions. # # For background, the table-based strategy is a 4-bit windowed multiplication. # It precomputes all 4-bit multiples of H (this is 16 128-bit rows), then loops # over 4-bit windows of the input and indexes them up into the table. Visually, # it multiplies as in the schoolbook multiplication diagram below, but with # more terms. (Each term is 4 bits, so there are 32 terms in each row.) First # it incorporates the terms labeled '1' by indexing the most significant term # of X into the table. Then it shifts and repeats for '2' and so on. # # hhhhhh # * xxxxxx # ============ # 666666 # 555555 # 444444 # 333333 # 222222 # 111111 # # This implementation changes the order. We treat the table as a 16×16 matrix # and transpose it. The first row is then the first byte of each multiple of H, # and so on. We then reorder terms as below. Observe that the terms labeled '1' # and '2' are all lookups into the first row, etc. This maps well to the SSSE3 # pshufb instruction, using alternating terms of X in parallel as indices. This # alternation is needed because pshufb maps 4 bits to 8 bits. Then we shift and # repeat for each row. # # hhhhhh # * xxxxxx # ============ # 224466 # 113355 # 224466 # 113355 # 224466 # 113355 # # Next we account for GCM's confusing bit order. The "first" bit is the least # significant coefficient, but GCM treats the most sigificant bit within a byte # as first. Bytes are little-endian, and bits are big-endian. We reverse the # bytes in XMM registers for a consistent bit and byte ordering, but this means # the least significant bit is the most significant coefficient and vice versa. # # For consistency, "low", "high", "left-shift", and "right-shift" refer to the # bit ordering within the XMM register, rather than the reversed coefficient # ordering. Low bits are less significant bits and more significant # coefficients. Right-shifts move from MSB to the LSB and correspond to # increasing the power of each coefficient. # # Note this bit reversal enters into the table's column indices. H*1 is stored # in column 0b1000 and H*x^3 is stored in column 0b0001. It also means earlier # table rows contain more significant coefficients, so we iterate forwards. $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; push(@INC,"${dir}","${dir}../../../perlasm"); require "x86asm.pl"; $output = pop; open STDOUT, ">$output"; &asm_init($ARGV[0]); my ($Xi, $Htable, $in, $len) = ("edi", "esi", "edx", "ecx"); &static_label("reverse_bytes"); &static_label("low4_mask"); my $call_counter = 0; # process_rows emits assembly code to process $rows rows of the table. On # input, $Htable stores the pointer to the next row. xmm0 and xmm1 store the # low and high halves of the input. The result so far is passed in xmm2. xmm3 # must be zero. On output, $Htable is advanced to the next row and xmm2 is # updated. xmm3 remains zero. It clobbers eax, xmm4, xmm5, and xmm6. sub process_rows { my ($rows) = @_; $call_counter++; # Shifting whole XMM registers by bits is complex. psrldq shifts by # bytes, and psrlq shifts the two 64-bit halves separately. Each row # produces 8 bits of carry, and the reduction needs an additional 7-bit # shift. This must fit in 64 bits so reduction can use psrlq. This # allows up to 7 rows at a time. die "Carry register would overflow 64 bits." if ($rows*8 + 7 > 64); &mov("eax", $rows); &set_label("loop_row_$call_counter"); &movdqa("xmm4", &QWP(0, $Htable)); &lea($Htable, &DWP(16, $Htable)); # Right-shift xmm2 and xmm3 by 8 bytes. &movdqa("xmm6", "xmm2"); &palignr("xmm6", "xmm3", 1); &movdqa("xmm3", "xmm6"); &psrldq("xmm2", 1); # Load the next table row and index the low and high bits of the input. # Note the low (respectively, high) half corresponds to more # (respectively, less) significant coefficients. &movdqa("xmm5", "xmm4"); &pshufb("xmm4", "xmm0"); &pshufb("xmm5", "xmm1"); # Add the high half (xmm5) without shifting. &pxor("xmm2", "xmm5"); # Add the low half (xmm4). This must be right-shifted by 4 bits. First, # add into the carry register (xmm3). &movdqa("xmm5", "xmm4"); &psllq("xmm5", 60); &movdqa("xmm6", "xmm5"); &pslldq("xmm6", 8); &pxor("xmm3", "xmm6"); # Next, add into xmm2. &psrldq("xmm5", 8); &pxor("xmm2", "xmm5"); &psrlq("xmm4", 4); &pxor("xmm2", "xmm4"); &sub("eax", 1); &jnz(&label("loop_row_$call_counter")); # Reduce the carry register. The reduction polynomial is 1 + x + x^2 + # x^7, so we shift and XOR four times. &pxor("xmm2", "xmm3"); # x^0 = 0 &psrlq("xmm3", 1); &pxor("xmm2", "xmm3"); # x^1 = x &psrlq("xmm3", 1); &pxor("xmm2", "xmm3"); # x^(1+1) = x^2 &psrlq("xmm3", 5); &pxor("xmm2", "xmm3"); # x^(1+1+5) = x^7 &pxor("xmm3", "xmm3"); ____ } # gcm_gmult_ssse3 multiplies |Xi| by |Htable| and writes the result to |Xi|. # |Xi| is represented in GHASH's serialized byte representation. |Htable| is # formatted as described above. # void gcm_gmult_ssse3(uint64_t Xi[2], const u128 Htable[16]); &function_begin("gcm_gmult_ssse3"); &mov($Xi, &wparam(0)); &mov($Htable, &wparam(1)); &movdqu("xmm0", &QWP(0, $Xi)); &call(&label("pic_point")); &set_label("pic_point"); &blindpop("eax"); &movdqa("xmm7", &QWP(&label("reverse_bytes")."-".&label("pic_point"), "eax")); &movdqa("xmm2", &QWP(&label("low4_mask")."-".&label("pic_point"), "eax")); # Reverse input bytes to deserialize. &pshufb("xmm0", "xmm7"); # Split each byte into low (xmm0) and high (xmm1) halves. &movdqa("xmm1", "xmm2"); &pandn("xmm1", "xmm0"); &psrld("xmm1", 4); &pand("xmm0", "xmm2"); # Maintain the result in xmm2 (the value) and xmm3 (carry bits). Note # that, due to bit reversal, xmm3 contains bits that fall off when # right-shifting, not left-shifting. &pxor("xmm2", "xmm2"); &pxor("xmm3", "xmm3"); # We must reduce at least once every 7 rows, so divide into three # chunks. &process_rows(5); &process_rows(5); &process_rows(6); # Store the result. Reverse bytes to serialize. &pshufb("xmm2", "xmm7"); &movdqu(&QWP(0, $Xi), "xmm2"); # Zero any registers which contain secrets. &pxor("xmm0", "xmm0"); &pxor("xmm1", "xmm1"); &pxor("xmm2", "xmm2"); &pxor("xmm3", "xmm3"); &pxor("xmm4", "xmm4"); &pxor("xmm5", "xmm5"); &pxor("xmm6", "xmm6"); &function_end("gcm_gmult_ssse3"); # gcm_ghash_ssse3 incorporates |len| bytes from |in| to |Xi|, using |Htable| as # the key. It writes the result back to |Xi|. |Xi| is represented in GHASH's # serialized byte representation. |Htable| is formatted as described above. # void gcm_ghash_ssse3(uint64_t Xi[2], const u128 Htable[16], const uint8_t *in, # size_t len); &function_begin("gcm_ghash_ssse3"); &mov($Xi, &wparam(0)); &mov($Htable, &wparam(1)); &mov($in, &wparam(2)); &mov($len, &wparam(3)); &movdqu("xmm0", &QWP(0, $Xi)); &call(&label("pic_point")); &set_label("pic_point"); &blindpop("ebx"); &movdqa("xmm7", &QWP(&label("reverse_bytes")."-".&label("pic_point"), "ebx")); # This function only processes whole blocks. &and($len, -16); # Reverse input bytes to deserialize. We maintain the running # total in xmm0. &pshufb("xmm0", "xmm7"); # Iterate over each block. On entry to each iteration, xmm3 is zero. &pxor("xmm3", "xmm3"); &set_label("loop_ghash"); &movdqa("xmm2", &QWP(&label("low4_mask")."-".&label("pic_point"), "ebx")); # Incorporate the next block of input. &movdqu("xmm1", &QWP(0, $in)); &pshufb("xmm1", "xmm7"); # Reverse bytes. &pxor("xmm0", "xmm1"); # Split each byte into low (xmm0) and high (xmm1) halves. &movdqa("xmm1", "xmm2"); &pandn("xmm1", "xmm0"); &psrld("xmm1", 4); &pand("xmm0", "xmm2"); # Maintain the result in xmm2 (the value) and xmm3 (carry bits). Note # that, due to bit reversal, xmm3 contains bits that fall off when # right-shifting, not left-shifting. &pxor("xmm2", "xmm2"); # xmm3 is already zero at this point. # We must reduce at least once every 7 rows, so divide into three # chunks. &process_rows(5); &process_rows(5); &process_rows(6); &movdqa("xmm0", "xmm2"); # Rewind $Htable for the next iteration. &lea($Htable, &DWP(-256, $Htable)); # Advance input and continue. &lea($in, &DWP(16, $in)); &sub($len, 16); &jnz(&label("loop_ghash")); # Reverse bytes and store the result. &pshufb("xmm0", "xmm7"); &movdqu(&QWP(0, $Xi), "xmm0"); # Zero any registers which contain secrets. &pxor("xmm0", "xmm0"); &pxor("xmm1", "xmm1"); &pxor("xmm2", "xmm2"); &pxor("xmm3", "xmm3"); &pxor("xmm4", "xmm4"); &pxor("xmm5", "xmm5"); &pxor("xmm6", "xmm6"); &function_end("gcm_ghash_ssse3"); # reverse_bytes is a permutation which, if applied with pshufb, reverses the # bytes in an XMM register. &set_label("reverse_bytes", 16); &data_byte(15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0); # low4_mask is an XMM mask which selects the low four bits of each byte. &set_label("low4_mask", 16); &data_word(0x0f0f0f0f, 0x0f0f0f0f, 0x0f0f0f0f, 0x0f0f0f0f); &asm_finish(); close STDOUT or die "error closing STDOUT";