{ "Menu": { "Task": { "name": "", "help": "" }, "Alas": { "name": "SRC", "help": "" } }, "Task": { "Alas": { "name": "SRC設定", "help": "" }, "Restart": { "name": "除錯", "help": "" } }, "Scheduler": { "_info": { "name": "任務設定", "help": "" }, "Enable": { "name": "啟用該功能", "help": "將這個任務加入調度器\n委託、科研、收穫任務是強制打開的" }, "NextRun": { "name": "下一次執行時間", "help": "自動計算的數值，不需要手動修改。清空後將立刻執行" }, "Command": { "name": "內部任務名稱", "help": "" }, "ServerUpdate": { "name": "伺服器更新時間", "help": "一些任務執行成功後，將推遲下一次執行伺服器更新的時間\n自動換算時區，一般不需要修改" } }, "Emulator": { "_info": { "name": "模擬器設定", "help": "" }, "Serial": { "name": "模擬器 Serial", "help": "常見的模擬器 Serial 可以查詢下方列表\n填 \"auto\" 自動檢測模擬器，多個模擬器正在運行或使用不支持自動檢測的模擬器時無法使用 \"auto\"，必須手動填寫\n模擬器預設 Serial：\n- 藍疊模擬器 127.0.0.1:5555\n- 藍疊模擬器4 Hyper-v版，填\"bluestacks4-hyperv\"自動連接，多開填\"bluestacks4-hyperv-2\"以此類推\n- 藍疊模擬器5 Hyper-v版，填\"bluestacks5-hyperv\"自動連接，多開填\"bluestacks5-hyperv-1\"以此類推\n- 夜神模擬器 127.0.0.1:62001\n- 夜神模擬器64位元 127.0.0.1:59865\n- MuMu模擬器/MuMu模擬器X 127.0.0.1:7555\n- 逍遙模擬器 127.0.0.1:21503\n- 雷電模擬器 emulator-5554 或 127.0.0.1:5555\n- WSA，填\"wsa-0\"使遊戲在後臺運行，需要使用第三方軟件操控或關閉\n如果你使用了模擬器的多開功能，他們的 Serial 將不是預設的，可以在 console.bat 中執行 `adb devices` 查詢，或根據模擬器官方的教程填寫" }, "PackageName": { "name": "遊戲伺服器", "help": "模擬器上裝有多個遊戲客戶端時，需要手動選擇伺服器", "auto": "自動檢測", "com.miHoYo.hkrpg": "CN", "com.HoYoverse.hkrpgoversea": "OVERSEA", "com.miHoYo.hkrpg.bilibili": "CN com.miHoYo.hkrpg.bilibili" }, "ScreenshotMethod": { "name": "模擬器截圖方案", "help": "使用自動選擇時，將執行一次性能測試並自動更改為最快的截圖方案\n一般情況下的速度: DroidCast_raw >> aScreenCap_nc > ADB_nc >>> aScreenCap > uiautomator2 ~= ADB\n運行 工具 - 性能測試 以尋找最快的方案", "auto": "自動選擇最快的", "ADB": "ADB", "ADB_nc": "ADB_nc", "uiautomator2": "uiautomator2", "aScreenCap": "aScreenCap", "aScreenCap_nc": "aScreenCap_nc", "DroidCast": "DroidCast", "DroidCast_raw": "DroidCast_raw", "scrcpy": "scrcpy" }, "ControlMethod": { "name": "模擬器控制方案", "help": "速度: MaaTouch = minitouch > Hermit >>> uiautomator2 ~= ADB\n建議選MaaTouch", "minitouch": "minitouch", "MaaTouch": "MaaTouch" }, "ScreenshotDedithering": { "name": "去除圖片色彩抖動", "help": "在手機上運行時開啟" }, "AdbRestart": { "name": "在檢測不到設備的時候嘗試重啟adb", "help": "" } }, "EmulatorInfo": { "_info": { "name": "模擬器設置", "help": "下列數值是根據Serial自動填充的，如果不懂請不要隨意修改" }, "Emulator": { "name": "模擬器類型", "help": "", "auto": "自動檢測", "NoxPlayer": "夜神模擬器", "NoxPlayer64": "夜神模擬器64位", "BlueStacks4": "藍疊模擬器4", "BlueStacks5": "藍疊模擬器5", "BlueStacks4HyperV": "藍疊模擬器4 Hyper-V", "BlueStacks5HyperV": "藍疊模擬器5 Hyper-V", "LDPlayer3": "雷電模擬器3", "LDPlayer4": "雷電模擬器4", "LDPlayer9": "雷電模擬器9", "MuMuPlayer": "MuMu模擬器", "MuMuPlayerX": "MuMu模擬器X", "MuMuPlayer12": "MuMu模擬器12", "MEmuPlayer": "逍遙模擬器" }, "name": { "name": "模擬器實例名稱", "help": "" }, "path": { "name": "模擬器安裝路徑", "help": "" } }, "Error": { "_info": { "name": "除錯設定", "help": "" }, "Restart": { "name": "出錯時，重啟遊戲", "help": "", "game": "重啟遊戲", "game_emulator": "重啟模擬器和遊戲" }, "SaveError": { "name": "出錯時，保存 Log 和截圖", "help": "" }, "ScreenshotLength": { "name": "出錯時，保留最後 X 張截圖", "help": "" }, "OnePushConfig": { "name": "錯誤推送設定", "help": "發生無法處理的异常後，使用 Onepush 推送错误消息。設定參考文檔：https://github.com/LmeSzinc/AzurLaneAutoScript/wiki/Onepush-configuration-%5BCN%5D" } }, "Optimization": { "_info": { "name": "優化設定", "help": "" }, "ScreenshotInterval": { "name": "放慢截圖速度至 X 秒一張", "help": "執行兩次截圖之間的最小間隔，限制在 0.1 ~ 0.3，對於高配置電腦能降低 CPU 佔用" }, "CombatScreenshotInterval": { "name": "戰鬥中放慢截圖速度至 X 秒一張", "help": "執行兩次截圖之間的最小間隔，限制在 0.1 ~ 1.0，能降低戰鬥時的 CPU 佔用" }, "TaskHoardingDuration": { "name": "囤積任務 X 分鐘", "help": "能在收穫期間降低操作遊戲的頻率\n任務觸發後，等待 X 分鐘後，一次性執行佇列中的任務" }, "WhenTaskQueueEmpty": { "name": "當任務隊列清空後", "help": "無任務時關閉遊戲，能在收菜期間降低 CPU 佔用", "stay_there": "停在原處", "goto_main": "前往主界面", "close_game": "關閉遊戲" } }, "Storage": { "_info": { "name": "任務狀態", "help": "存放任務內部狀態，任務异常時可以手動清除" }, "Storage": { "name": "Storage.Storage.name", "help": "Storage.Storage.help" } }, "Gui": { "Aside": { "Install": "安裝", "Home": "主頁", "Develop": "開發", "Performance": "性能", "Setting": "設定", "AddAlas": "新增" }, "Button": { "Start": "啟動", "Stop": "停止", "ScrollON": "自動滾動 開", "ScrollOFF": "自動滾動 關", "ClearLog": "清空日誌", "Setting": "設定", "CheckUpdate": "檢查更新", "ClickToUpdate": "進行更新", "RetryUpdate": "重試更新", "CancelUpdate": "取消更新" }, "Toast": { "DisableTranslateMode": "點擊這裡關閉翻譯模式", "ConfigSaved": "設定已儲存", "AlasIsRunning": "調度器已在執行中", "ClickToUpdate": "有更新可用，點擊這裡進行更新" }, "Status": { "Running": "執行中", "Inactive": "閒置", "Warning": "發生錯誤", "Updating": "等待更新" }, "MenuAlas": { "Overview": "總覽", "Log": "執行日誌" }, "MenuDevelop": { "HomePage": "主頁", "Translate": "翻譯", "Update": "更新器", "Remote": "遠程控制", "Utils": "工具" }, "Overview": { "Scheduler": "調度器", "Log": "日誌", "Running": "執行中", "Pending": "佇列中", "Waiting": "等待中", "NoTask": "無任務" }, "AddAlas": { "PopupTitle": "添加新的設定", "NewName": "新設定的檔案名", "CopyFrom": "從現有的設定中複製", "Confirm": "添加", "FileExist": "存在同名的設定檔案，請重新命名", "InvalidChar": "設定檔案名不可以包含下列任意字元：.\\/:*?\"<>|", "InvalidPrefixTemplate": "設定檔案名不能以 template 開頭" }, "Update": { "UpToDate": "已是最新版本", "HaveUpdate": "有新版本可用", "UpdateStart": "開始更新", "UpdateWait": "等待所有 Alas 完成當前任務", "UpdateRun": "更新中", "UpdateSuccess": "更新成功，正在重啓", "UpdateFailed": "更新失敗，可在./log/*_gui.txt中找到錯誤日誌", "UpdateChecking": "檢查更新中", "UpdateCancel": "取消更新，重啓 Alas 中", "UpdateFinish": "更新成功，請手動重啓", "Local": "本地", "Upstream": "上游倉庫", "Author": "作者", "Time": "提交時間", "Message": "提交資訊", "DisabledWarn": "更新模塊未啟用，你需要手動重啓 Alas 進行更新", "DetailedHistory": "詳細提交歷史" }, "Remote": { "Running": "運行中", "NotRunning": "未運行，与伺服器的連接斷開或伺服器離線", "NotEnable": "未啟用，在 deploy.yaml 中設定 webui 密碼並啟用遠程控制", "EntryPoint": "遠程控制 url 連結:", "ConfigureHint": "配寘教程：", "SSHNotInstall": "系統中沒有 ssh 工具，請參閱教程下載安裝 ssh" }, "Text": { "InvalidFeedBack": "格式錯誤。 示例：{0}", "Clear": "清除" } } }