StarRailCopilot/module/config/i18n/zh-TW.json
2023-06-18 18:41:58 +08:00

308 lines
11 KiB
JSON
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

{
"Menu": {
"Alas": {
"name": "SRC",
"help": ""
},
"Daily": {
"name": "每日",
"help": ""
}
},
"Task": {
"Alas": {
"name": "SRC設定",
"help": ""
},
"Restart": {
"name": "除錯",
"help": ""
},
"Dungeon": {
"name": "每日副本",
"help": ""
},
"DailyQuest": {
"name": "每日任務",
"help": ""
}
},
"Scheduler": {
"_info": {
"name": "任務設定",
"help": ""
},
"Enable": {
"name": "啟用該功能",
"help": "將這個任務加入調度器\n委託、科研、收穫任務是強制打開的"
},
"NextRun": {
"name": "下一次執行時間",
"help": "自動計算的數值,不需要手動修改。清空後將立刻執行"
},
"Command": {
"name": "內部任務名稱",
"help": ""
},
"ServerUpdate": {
"name": "伺服器更新時間",
"help": "一些任務執行成功後,將推遲下一次執行伺服器更新的時間\n自動換算時區一般不需要修改"
}
},
"Emulator": {
"_info": {
"name": "模擬器設定",
"help": ""
},
"Serial": {
"name": "模擬器 Serial",
"help": "常見的模擬器 Serial 可以查詢下方列表\n填 \"auto\" 自動檢測模擬器,多個模擬器正在運行或使用不支持自動檢測的模擬器時無法使用 \"auto\",必須手動填寫\n模擬器預設 Serial\n- 藍疊模擬器 127.0.0.1:5555\n- 藍疊模擬器4 Hyper-v版填\"bluestacks4-hyperv\"自動連接,多開填\"bluestacks4-hyperv-2\"以此類推\n- 藍疊模擬器5 Hyper-v版填\"bluestacks5-hyperv\"自動連接,多開填\"bluestacks5-hyperv-1\"以此類推\n- 夜神模擬器 127.0.0.1:62001\n- 夜神模擬器64位元 127.0.0.1:59865\n- MuMu模擬器/MuMu模擬器X 127.0.0.1:7555\n- MuMu模擬器12 127.0.0.1:16384\n- 逍遙模擬器 127.0.0.1:21503\n- 雷電模擬器 emulator-5554 或 127.0.0.1:5555\n- WSA填\"wsa-0\"使遊戲在後臺運行,需要使用第三方軟件操控或關閉\n如果你使用了模擬器的多開功能他們的 Serial 將不是預設的,可以在 console.bat 中執行 `adb devices` 查詢,或根據模擬器官方的教程填寫"
},
"PackageName": {
"name": "遊戲伺服器",
"help": "模擬器上裝有多個遊戲客戶端時,需要手動選擇伺服器",
"auto": "自動檢測",
"com.miHoYo.hkrpg": "CN",
"com.HoYoverse.hkrpgoversea": "OVERSEA",
"com.miHoYo.hkrpg.bilibili": "CN com.miHoYo.hkrpg.bilibili"
},
"ScreenshotMethod": {
"name": "模擬器截圖方案",
"help": "使用自動選擇時,將執行一次性能測試並自動更改為最快的截圖方案\n一般情況下的速度: DroidCast_raw >> aScreenCap_nc > ADB_nc >>> aScreenCap > uiautomator2 ~= ADB\n運行 工具 - 性能測試 以尋找最快的方案",
"auto": "自動選擇最快的",
"ADB": "ADB",
"ADB_nc": "ADB_nc",
"uiautomator2": "uiautomator2",
"aScreenCap": "aScreenCap",
"aScreenCap_nc": "aScreenCap_nc",
"DroidCast": "DroidCast",
"DroidCast_raw": "DroidCast_raw",
"scrcpy": "scrcpy"
},
"ControlMethod": {
"name": "模擬器控制方案",
"help": "速度: MaaTouch = minitouch > Hermit >>> uiautomator2 ~= ADB\n建議選MaaTouch",
"minitouch": "minitouch",
"MaaTouch": "MaaTouch"
},
"AdbRestart": {
"name": "在檢測不到設備的時候嘗試重啟adb",
"help": ""
}
},
"EmulatorInfo": {
"_info": {
"name": "模擬器設置",
"help": "下列數值是根據Serial自動填充的如果不懂請不要隨意修改"
},
"Emulator": {
"name": "模擬器類型",
"help": "",
"auto": "自動檢測",
"NoxPlayer": "夜神模擬器",
"NoxPlayer64": "夜神模擬器64位",
"BlueStacks4": "藍疊模擬器4",
"BlueStacks5": "藍疊模擬器5",
"BlueStacks4HyperV": "藍疊模擬器4 Hyper-V",
"BlueStacks5HyperV": "藍疊模擬器5 Hyper-V",
"LDPlayer3": "雷電模擬器3",
"LDPlayer4": "雷電模擬器4",
"LDPlayer9": "雷電模擬器9",
"MuMuPlayer": "MuMu模擬器",
"MuMuPlayerX": "MuMu模擬器X",
"MuMuPlayer12": "MuMu模擬器12",
"MEmuPlayer": "逍遙模擬器"
},
"name": {
"name": "模擬器實例名稱",
"help": ""
},
"path": {
"name": "模擬器安裝路徑",
"help": ""
}
},
"Error": {
"_info": {
"name": "除錯設定",
"help": ""
},
"Restart": {
"name": "出錯時,重啟遊戲",
"help": "",
"game": "重啟遊戲",
"game_emulator": "重啟模擬器和遊戲"
},
"SaveError": {
"name": "出錯時,保存 Log 和截圖",
"help": ""
},
"ScreenshotLength": {
"name": "出錯時,保留最後 X 張截圖",
"help": ""
},
"OnePushConfig": {
"name": "錯誤推送設定",
"help": "發生無法處理的异常後,使用 Onepush 推送错误消息。設定參考文檔https://github.com/LmeSzinc/AzurLaneAutoScript/wiki/Onepush-configuration-%5BCN%5D"
}
},
"Optimization": {
"_info": {
"name": "優化設定",
"help": ""
},
"ScreenshotInterval": {
"name": "放慢截圖速度至 X 秒一張",
"help": "執行兩次截圖之間的最小間隔,限制在 0.1 ~ 0.3,對於高配置電腦能降低 CPU 佔用"
},
"CombatScreenshotInterval": {
"name": "戰鬥中放慢截圖速度至 X 秒一張",
"help": "執行兩次截圖之間的最小間隔,限制在 0.1 ~ 1.0,能降低戰鬥時的 CPU 佔用"
},
"WhenTaskQueueEmpty": {
"name": "當任務隊列清空後",
"help": "無任務時關閉遊戲,能在收菜期間降低 CPU 佔用",
"stay_there": "停在原處",
"goto_main": "前往主界面",
"close_game": "關閉遊戲"
}
},
"Dungeon": {
"_info": {
"name": "每日副本設定",
"help": "打本清體力直到清空"
},
"Name": {
"name": "副本名稱",
"help": "",
"Calyx_Golden_Memories": "回憶之蕾•擬造花萼(金)",
"Calyx_Golden_Aether": "乙太之蕾•擬造花萼(金)",
"Calyx_Golden_Treasures": "藏珍之蕾•擬造花萼(金)",
"Calyx_Crimson_Destruction": "毀滅之蕾•擬造花萼(赤)",
"Calyx_Crimson_Preservation": "存護之蕾•擬造花萼(赤)",
"Calyx_Crimson_Calyx_Crimson_Hunt": "巡獵之蕾•擬造花萼(赤)",
"Calyx_Crimson_Abundance": "豐饒之蕾•擬造花萼(赤)",
"Calyx_Crimson_Erudition": "智識之蕾•擬造花萼(赤)",
"Calyx_Crimson_Harmony": "同諧之蕾•擬造花萼(赤)",
"Calyx_Crimson_Nihility": "虛無之蕾•擬造花萼(赤)",
"Stagnant_Shadow_Quanta": "空海之形•凝滯虛影",
"Stagnant_Shadow_Gust": "巽風之形•凝滯虛影",
"Stagnant_Shadow_Fulmination": "鳴雷之形•凝滯虛影",
"Stagnant_Shadow_Blaze": "炎華之形•凝滯虛影",
"Stagnant_Shadow_Spike": "鋒芒之形•凝滯虛影",
"Stagnant_Shadow_Rime": "霜晶之形•凝滯虛影",
"Stagnant_Shadow_Mirage": "幻光之形•凝滯虛影",
"Stagnant_Shadow_Icicle": "冰稜之形•凝滯虛影",
"Stagnant_Shadow_Doom": "震厄之形•凝滯虛影",
"Cavern_of_Corrosion_Path_of_Gelid_Wind": "霜風之徑•侵蝕隧洞",
"Cavern_of_Corrosion_Path_of_Jabbing_Punch": "迅拳之徑•侵蝕隧洞",
"Cavern_of_Corrosion_Path_of_Drifting": "漂泊之徑•侵蝕隧洞",
"Cavern_of_Corrosion_Path_of_Providence": "睿治之徑•侵蝕隧洞",
"Cavern_of_Corrosion_Path_of_Holy_Hymn": "聖頌之徑•侵蝕隧洞",
"Cavern_of_Corrosion_Path_of_Conflagration": "野焰之徑•侵蝕隧洞"
},
"Team": {
"name": "打本隊伍",
"help": "",
"1": "1",
"2": "2",
"3": "3",
"4": "4",
"5": "5",
"6": "6"
}
},
"Gui": {
"Aside": {
"Install": "安裝",
"Home": "主頁",
"Develop": "開發",
"Performance": "性能",
"Setting": "設定",
"AddAlas": "新增"
},
"Button": {
"Start": "啟動",
"Stop": "停止",
"ScrollON": "自動滾動 開",
"ScrollOFF": "自動滾動 關",
"ClearLog": "清空日誌",
"Setting": "設定",
"CheckUpdate": "檢查更新",
"ClickToUpdate": "進行更新",
"RetryUpdate": "重試更新",
"CancelUpdate": "取消更新"
},
"Toast": {
"DisableTranslateMode": "點擊這裡關閉翻譯模式",
"ConfigSaved": "設定已儲存",
"AlasIsRunning": "調度器已在執行中",
"ClickToUpdate": "有更新可用,點擊這裡進行更新"
},
"Status": {
"Running": "執行中",
"Inactive": "閒置",
"Warning": "發生錯誤",
"Updating": "等待更新"
},
"MenuAlas": {
"Overview": "總覽",
"Log": "執行日誌"
},
"MenuDevelop": {
"HomePage": "主頁",
"Translate": "翻譯",
"Update": "更新器",
"Remote": "遠程控制",
"Utils": "工具"
},
"Overview": {
"Scheduler": "調度器",
"Log": "日誌",
"Running": "執行中",
"Pending": "佇列中",
"Waiting": "等待中",
"NoTask": "無任務"
},
"AddAlas": {
"PopupTitle": "添加新的設定",
"NewName": "新設定的檔案名",
"CopyFrom": "從現有的設定中複製",
"Confirm": "添加",
"FileExist": "存在同名的設定檔案,請重新命名",
"InvalidChar": "設定檔案名不可以包含下列任意字元:.\\/:*?\"<>|",
"InvalidPrefixTemplate": "設定檔案名不能以 template 開頭"
},
"Update": {
"UpToDate": "已是最新版本",
"HaveUpdate": "有新版本可用",
"UpdateStart": "開始更新",
"UpdateWait": "等待所有 Alas 完成當前任務",
"UpdateRun": "更新中",
"UpdateSuccess": "更新成功,正在重啓",
"UpdateFailed": "更新失敗,可在./log/*_gui.txt中找到錯誤日誌",
"UpdateChecking": "檢查更新中",
"UpdateCancel": "取消更新,重啓 Alas 中",
"UpdateFinish": "更新成功,請手動重啓",
"Local": "本地",
"Upstream": "上游倉庫",
"Author": "作者",
"Time": "提交時間",
"Message": "提交資訊",
"DisabledWarn": "更新模塊未啟用,你需要手動重啓 Alas 進行更新",
"DetailedHistory": "詳細提交歷史"
},
"Remote": {
"Running": "運行中",
"NotRunning": "未運行,与伺服器的連接斷開或伺服器離線",
"NotEnable": "未啟用,在 deploy.yaml 中設定 webui 密碼並啟用遠程控制",
"EntryPoint": "遠程控制 url 連結:",
"ConfigureHint": "配寘教程:",
"SSHNotInstall": "系統中沒有 ssh 工具,請參閱教程下載安裝 ssh"
},
"Text": {
"InvalidFeedBack": "格式錯誤。 示例:{0}",
"Clear": "清除"
}
}
}